The Millermatic 211 is an All-in-one MIG wire welder designed for versatility and ease-of-use. With the Smooth Start circuitry and Advanced Auto-Set™ the 211 has five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Rental comes with welder, cart and welding helmet. C25 shielding gas and wire additional charge
17" Driver, 28 Blades CCW Rotation includes vac. attachement
Scarifies & Profiles Concrete for excellent adhesion of coatings
Compares to shot blasting results
Approx 200sqft/hr
9HP Honda
14" Blade 5" Max Depth of Cut
16" Blade 6"
22" Wide 37" High
250lbs
115V 12.6 AMP 1760RPM Motor
Heads for Sanding Wood Floors
Deck Heads for Sanding Wood Decks
Heads to Remove Glues, Paint, Mastics and other Adhesives from Concrete Floors
34" Wide 90" Long (W/Bucket)
43" High, 1880lbs
500lb Lift 1530lbs Tipping
34" Bucket
20HP Gas
Dump Height to Hinge Pin 66"
120V 6AMP 10" Wide 33lbs
White Brushes-Soft for Area Rugs, Orientals, Delicates
Blue Brushes-STD for Buisness, Commerical and Residental Carpets
Black Brushes-Stiff for Tile, Quarry Stone, Concrete (Grout Lines)
90,000BTU/HR
K-1 Kerosene 9 Gal Uses .66 Gal/HR
4AMP 120V
100lb tank capacity must have dry clean sand
Needs 7-125CFM To Operate
7CFM = 3/32 Tip 100lbs/HR Very Fine Sand
15CFM = 1/8 150lbs?HR Fine Sand
25CFM = 5/32 200lbs/HR
40CFM = 3/16 300lbs/HR
80CFM = 1/4 500lbs/HR
125CFM = 5/16 800lbs/HR
120V 12AMP
7" or 9" Pad 5/8" 11 Spindle
600-3500RPM
