10" Blade with sliding compound
Max width of cut 10 1/4"
Max height of cut 4 1/4"
Miter Max 60 Degrees
Bevel Max 47 Degrees
18V Cordless Magnetic drill 2 speed 400/690RPM
13.75"L X 7.5"W X 15.5"T 29.5lbs 5.75" Stroke
Up to 1/2" Twist Drill (With Drill Chuck Adapter) or 1 1/2" using annular cutters
15" Hand Snake for sinks & toilets
Remove Vinyl tile, glues, thinset off concrete & wood floor
Honda 7000W Peak inverter Generator
20A 125V GFCI Duplex (2),
30A 125V Locking Plug,
30A 125/250V Locking Plug
Metal Strapping Machine to secure items to pallets or band boxes or crates together.
1.7 cfm 60 Shots per min @ 80psi
Shoots 1 1/4-2 1/2" Finish nails
The VC 40-U is great for removing dust from drilling, slitting, grinding, cutting and dry coring, removal of mineral materials dust and debris, removing slurry from wet coring, and general purpose cleaning around the jobsite.
Variable-speed dial settings from 1,400-2,000 RPM. Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection. Motor located on opposite end of handle from sanding head, providing balance and control. Built-in dust collection hose.
15 Amp, 120V Demolition Hammer aka Jackhammer
Includes 50' 10/3 Extension cord, 2 tools, cart
The Bostitch SX1838K 18GA Narrow Crown Finish Stapler is designed for the professional driving 7/32 In. narrow crown staples from 1/2 In. to 1-1/2 In. in length. Along with our other small-body finish tools, this tool is made with lightweight magnesium and has a tough new industrial design. The oil-free engine requires no maintenance and prevents stains on work surfaces, while the swivel air fitting with filtered air inlet increases maneuverability and improves engine durability.
This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats
This heavy-duty, fast cutting, easy to operate 16" Electric Chainsaw is double insulated for operator protection. It has an automatic chain oiler for heavy continuous cutting and an Electric Chain brake for maximum productivity
The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame accommodates 6" and 8" profile wheels. A simple blade shaft lock makes for easy blade removal and the linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal. Made in the USA with a One-year limited warranty
