9HP Honda
14" Blade 5" Max Depth of Cut
16" Blade 6"
22" Wide 37" High
250lbs
34" Wide 90" Long (W/Bucket)
43" High, 1880lbs
500lb Lift 1530lbs Tipping
34" Bucket
20HP Gas
Dump Height to Hinge Pin 66"
Chain Cutter 1 1/2"-6" Capacity
Cuts Cast Iron, Concrete and Clay Pipe in limited space areas
110V 12.5AMP 3800RPM
14" Blade 1" Hole 4" Depth of cut
10" Blade with sliding compound
Max width of cut 10 1/4"
Max height of cut 4 1/4"
Miter Max 60 Degrees
Bevel Max 47 Degrees
AAMSCO LED Balloon Area light: Parking lots, Parties, Weddings, etc
Remove Vinyl tile, glues, thinset off concrete & wood floor
Atlas Copco 50:1 Gas driven jackhammer
110V 13AMP
Can Handle Two Air Guns
3.6 CFM @90PSI
8HP Wheelborrow Style, Idles down when full of air
18.3 CFM @ 100PSI, 175 Max PSI
3/8 Port & 1/4 Port
Extra wide 8'6' trailer. Drive over fenders. Electric brakes. Will haul load up to 12000 lbs
This versatile tractor/loader has both 3 point with PTO and a detachable industrial backhoe. The 47.1 gross HP, gives 2,848 lbs. of loader lift capacity and 121 in. max digging depth on the backhoe. This hydrostat driven, compact, high-performance 4wd tractor/loader/backhoe model is ideal for independent contractors, landscapers, rental services and anyone looking to add power, speed and efficiency to their worksite.
Lifts more than a skid steer or bobcat and roads at 14mph
Has standard skidsteer front loader attach plate
Other available attachments that fit the L47; forklift, auger, brush cutter mower, scraper blade, jackhammer, snowplow
*Load capacity of 200 lbs* 14.5 foot reach *Heavy Duty chain drive (no cable) *Cradle has two 36" wide support pads and two adjustable 12" wide outrigger pads* Non-slip surfaces prevent sliding* Flip-up hooks attached to support pads hold sheet for side wall construction* Entire lift breaks down to 4 easy-to-handle sections* Removing lock pin lets you fold tripod legs inward for passage through standard doorway even when loaded
The VC 40-U is great for removing dust from drilling, slitting, grinding, cutting and dry coring, removal of mineral materials dust and debris, removing slurry from wet coring, and general purpose cleaning around the jobsite.
Tough job got you in a corner? Put a U-Series to work on it. Zero-tail swing keeps the tail within the width of the tracks, so you can turn the house throughout its 360-degree turning radius without worrying about what is to the side or behind you.
The Tiller makes short work of traditional tilling, employing a heavy-duty, high torque design with hardened steel tines for any soil conditions, with no labor intensive man-handling of the machine. Till 6" deep and 40" wide in one pass
The Leveler is an excellent choice for light grading, backfilling, leveling of terrain, and as a platform for carrying materials to and from the jobsite
